Speedokote SMR-207/211 - Hot Rod Black Paint, Black Satin 2K Urethane, SMR-207 4:1 mix Single Stage Gallon kit with activator included
Speedokote SMR-207/211 - Hot Rod Black Paint, Black Satin 2K Urethane, SMR-207 4:1 mix Single Stage Gallon kit with activator included by Speedokote at R&R Super Shine. MPN: SMR-207/211. Hurry! Limited time offer. Offer valid only while supplies last. This sale is for a gallon of satin finish Hot Rod Black Paint (SMR-207) and a quart of activator; which yields 1.25 gallons sprayable. The SMR-207 is
Product Description & Reviews
This sale is for a gallon of satin finish Hot Rod Black Paint (SMR-207) and a quart of activator; which yields 1.25 gallons sprayable. The SMR-207 is a 4.8 lbs/gallon voc (National Rule product). Not for sale in 2.8 lbs/gallon voc areas like California. SMR-207 Hot Rod Black is a 2 component acrylic urethane coating. It mixes 4:1 with a 5-10% optional reduction with Urethane Grade Reducer. This coating is formulated to withstand the same atmospheric conditions as a high quality single stage urethane topcoat. GUN SETUP Fluid Tip psi HVLP Spray Gun 1.3 - 1.4mm 8-10 psi Conventional Gravity Feed 1.3 - 1.4mm 25-30 psi SURFACE PREPARATION: Apply SMR-207 Hot Rod Black directly over primer surfacer that has been finish sanded with 400-500 grit sandpaper. APPLICATION Apply 1 full wet coat followed by 1 medium wet coat. Allow 5-10 minutes flash time between coats. Time to recoat Air Dry 24 hours @ 70°F Bake After cool down Health and Safety: See Material Safety Data Sheet and labels for additional safety information and handling instructions. * Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury. * Follow spray equipment manufacturer's instructions to prevent personal injury or fire. * Provide adequate ventilation for health and fire hazard control. * Follow company, product MSDS and respirator manufacturer's recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory requirements. * Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS. * Always observe all applicable precautions and follow good safety and hygiene practices. Not for sale in California, Delaware or Maryland
Features & Highlights
- True 2K Urethane Durability
- Uniform Jet Black Color
- Excellent Exterior Stability from UV Light
- Fast Dry
- Chemical and Rub Resistant Finish
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Speedokote, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By House of Kolor
mpn: C2C-BC01-QT, ean: 0845927027231,
Shimrin2 Metallic color bases have a captivatingly rich color. Versatile in that they can be used as basecoats beneath a Kandy application or simply clear over the top for a vibrant metallic finish. From this metallic platform color possibilities bec...
By Plasti Dip
Plasti Dip is an air-dry, specialty rubber coating. In fact, it's the original peelable, flexible, insulating, non-slip, durable rubber coating. The Plasti Dip product line provides a wide range of coating solutions from automotive customization to ...
mpn: BAK2010, ean: 0026916844941,
DupliColor's Bed Armor is a water based formula , is low odor and cleans up with soap and water, prior to drying. It is formulated with Kevlar is resistant to gasoline and other automotive chemicals and withstands the extreme impacts of the most dem...
mpn: AA5, ean: 0633726019201,
This is a 3.0 Gallon Kit of Sprayable bedliner that will cover up to 80 SQ FT. This kit is any color YOU CHOOSE. SEND EMAIL REQUESTING COLOR TO SELLER, Includes a spray gun and 2 reducer cans that double as cups for the gun. Will do one bed up to 1/8...