Speedokote Epoxy Fast Dry 2.1 Low voc DTM Primer & Sealer Gray Gallon Kit, SMR-260G/261
Speedokote Epoxy Fast Dry 2.1 Low voc DTM Primer & Sealer Gray Gallon Kit, SMR-260G/261 by Speedokote at R&R Super Shine. MPN: SMR-260G/261. Hurry! Limited time offer. Offer valid only while supplies last. This sale is for a gallon of fast dry grey 2.1 lbs/gallon voc epoxy primer (SMR-260G) and a quart can of epoxy catalyst (SMR-261). The SMR-260 is 2.1
Product Description & Reviews
This sale is for a gallon of fast dry grey 2.1 lbs/gallon voc epoxy primer (SMR-260G) and a quart can of epoxy catalyst (SMR-261). The SMR-260 is 2.1 lbs/gallon voc and compliant everywhere. The SMR-260 is a fast dry, easy sanding 2K epoxy primer with great color and gloss holdout. SURFACE PREPARATIONS Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180-220 grit and re-clean. SPRAY GUN SETUP HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi APPLICATION Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about 3 days. After three days, the primer MUST be sanded prior to topcoat application. SAFETY This product was designed for and is intended solely for use by trained professionals. Read all warning statements and heed all recommended safety precautions before proceeding. DO NOT USE THIS SYSTEM WITHOUT SUFFICIENT VENTILATION. Users must wear appropriate, properly fitted NIOSH-approved activated charcoal cartridge respirator if a forced fresh-air system is not available. Always wear eye and face protection, as well as gloves and protective clothing. Do not use this product, or be exposed to spray mist / vapors if you have respiratory problems. KEEP OUT OF REACH OF CHILDREN AND PETS. This system comprises multiple components. Once mixed, this system will have hazards of all components. Read warnings on all packages before opening.
Features & Highlights
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075)
- Can be used as a primer and a sealer
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)
- Excellent adhesion and corrosion resistance
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Speedokote, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 41101, ean: 0051491411011,
Buildable, sandable, and easy to apply It has great interlocking adhesion qualities and very little preparation is necessary to get a top-notch bond With a solids content of 60%, High Build Primer has all the body it needs to do the job right with gr...
By American Automotive Products
mpn: AP-39glr/AH-37qt, ean: 0867914000447,
Automotive paint primer sealer applied as a high build sanding primer or final non-sanding primer sealer. Compatible with AF 970 Black Automotive Base coat certified to be among the Deepest Black Base coats in the market. Not for sale in California, ...
mpn: BPR0031-6 PK,
Dupli-Color Perfect Match Premium Automotive Paint is an easy-to-use, high-quality, fast-drying, acrylic lacquer aerosol paint specially formulated to exactly match the color of the original factory applied coating. Ideal for use on all OEM paint sur...
mpn: DC CP199 06, ean: 0700690399209,
Adhesion promoter improves adhesion for all paints and acts like a clear primer. Ideal for interior or exterior surfaces, like plastic, chrome, fiberglass bumpers and aluminum trim molding. Comes in an easy to use 11 ounce aerosol can.. . 6 Pack!6 Pa...